Essex PB&R - Plus 15 Escape Smoke Hood

    The Way To Safety Is Clear!

U.S. - Made Plus-15 Is The Clear Choice For Fire And Smoke Emergencies.

           * High Protection

           * High Convenience

           * Low Cost

The PLUS-15 is intended to be used as an escape filter hood in fire and smoke emergencies where oxygen exists in sufficient quantity to sustain life. Most fire situations contain sufficient oxygen. It is for a single use only.

The PLUS-15 has been designed in consideration of testing done by recognized international regulatory agencies that have studied fires. The contaminants that the PLUS-15 will remove, are based on these international studies.

A High Quality U.S.A. Made Smoke Hood That Fits In The Palm Of Your Hand

Protects Against Carbon Monoxide
Clear FEP Hood Offers Maximum Visibility
5 - 1/2 Year Shelf Life Lowers Replacement Cost
Lightweight, Portable, Easy-to-Use
One Size Fits Most Adults
Cost-Effective Solution for Large Groups or Individuals

Donning:

The PLUS15 can be donned in less than 20 seconds. This includes the time to: remove the PLUS-15 and barrier puch from the nylon puch; removing the PLUS-15 from its barrier pouch; and placing the PLUS-15 over the head and positioning in front of the mouth and nose and tightening all fit straps.

Oxygen:

The PLUS-15 does not provide oxygen. The contaminated air is drawn through the filter, cleaned and delivered to the user. Do not use the PLUS-15 in an oxygen deficient atmosphere.

Carbon Dioxide:

Carbon Dioxide is introduced into the hood by the reaction of the carbon monoxide filter and by the breath exhaled by the user. Carbon Dioxide is removed from the hood when the user exhales, opening the exhalation valve adjacent to the filter and emitting air from inside the breathing zone.

Carbon Monoxide:

Carbon Monoxide (CO) is a toxic gas found in almost all fires. It is the by-product of incomplete combustion. The PLUS-15 protects against CO concentrations as high as 10,000 ppm for over 15 minutes.

Inspection Method:

The PLUS-15 is acceptable for use if the "Replace By Date" marked on the label of the barrier pouch has not been exceeded and the barrier pouch has not been punctured, torn or lost vacuum.

Storage and Maintenance:

The PLUS-15 may be stored at temperatures between 85ºC/185ºF and -30ºC/-20ºF. The only maintenance needed for the PLUS-15 is to inspect the barrier pouch for any tears, punctures, and loss of vacuum or gain in weight. If there is any damage to the barrier pouch or the pouch has lost vacuum or the unit is otherwise damaged DO NOT USE THE DEVICE.

Materials of Construction:

Hood Materials:

Hood: FEP Film
Neck Seal: Elastic Draw Chord With Synch Ball
Adjustable Head Harness: Flame Retardant Nylon
Nose Cup: FDA Grade Silicone

Filter Materials:

Filter Holder: Polycarbonate
Particle Screen: Pleated N95 Filter
Acid Gas Pack: Granular Activated Carbon
Carbon Monoxide Removal: Granular CO Catalyst

Challange Atmosphere:

The PLUS-15 Filter Assembly has been tested against the following single toxic gases:
Challenge Gas	Concentration	Allowable Breakthrough	Actual Breakthrough
Carbon Monoxide	10,000 ppm	200 ppm	<30 ppm (24 min)
Hydrogen Cyanide	400 ppm	10 ppm	<10 ppm (60 min)
Hydrogen Chloride	1000 ppm	5 ppm	<5 ppm (170 min)
Acrolein (Propenal)	100 ppm	.5 ppm	<0.5 ppm (50 min)

Details
Dimensions	7" Long x 4" Tall x 5" Wide - When packaged in its protective nylon pouch.
Weight	Approx. 450 grams, individual weight varies, specific weight is listed on the foil barrier pouch.
Duration of Use	Provides 15 minutes of protection against exposure to toxic gases. Longer time duration can be achieved against less sever environments. (Refer to the "Challenge Atmosphere" under Detailed Images.
Packaging	The Plus-15 is folded inside a hermetically sealed, waterproof barrier pouch, which is then packaged inside a protective nylon pouch. The barrier pouch can be opened by hand and requires no additional tools.
Shelf Life	5 years and 6 months from date of manufacture as long as the hermetically sealed barrier pouch has not been damaged and unit is properly stored in its nylon pouch.
Breathing Resistance	The breathing resistance for inhalation is 3.2 in of H2O maximum and exhalation is 1.2 in of H2O maximum.
Fire Resistance	Made from FEP film, which has a rated melting temperature of 500 to 540ºF (250 to 280ºC).

Price:

$114.95

Quantity:

Add to cart